How to Make a Kitchen Remodelling Project Easier

How to Make a Kitchen Remodelling Project Easier

The prospect of embarking on a kitchen redesign is both exhilarating and nerve-racking at the same time. In order to make the process a little less stressful, we asked kitchen professionals for suggestions on how to make it easier, less expensive, and more successful. Consider this collection of excellent suggestions for turning your kitchen makeover into an adventure that culminates in the creation of the kitchen of your dreams!

Try an Island Before Making a Purchase

If you need extra counter and storage space, then investing in having the best kitchen renovations in Potomac MD may be a worthwhile investment. However, an island can restrict the amount of people who can work in the kitchen, limiting traffic flow to a one-way system with no passing lanes, and create claustrophobic conditions. Before committing to a certain island, you should try it out. Make a full-scale replica out of cardboard or plywood and live with it for a few days to get a feel for how it works. Check to see if you can open the doors of your stove and refrigerator. Is there no room for an island? Instead, consider using a kitchen trolley.

Create a makeshift kitchen for the duration of the project.

When your main kitchen is out of operation, you may use a temporary kitchen to prepare meals, wash dishes, and make your morning coffee while your main kitchen is closed. Keep a couple of your old cabinets and countertops in case you need to assemble a temporary kitchen. It is not necessary to have a sophisticated setup because the purpose here is utility. Install the cabinets and, if required, trim the countertop to suit the openings. Then include all of the counter-top appliances and other goods you’ll need for meal preparation, such as a toaster oven, hot plate, microwave, coffeemaker, and refrigerator, among other things (even a half-size model would be great).

Include an office space in your kitchen remodelling project.

Consider including a home office in your kitchen makeover if you intend to utilise it as such. You don’t require a lot of floor space. In many cases, a basic seating room with a computer station is sufficient. During the makeover, be sure to include outlets for connecting your computer equipment. Also, consider adding storage space, such as shelves or a recessed wall cabinet, to ensure that your papers do not go misplaced or become a jumble.

Ensure that there is enough space for future kitchen remodels and appliances

If you’re installing new cabinets but want to maintain your existing refrigerator, make sure to leave enough space between the cabinets to allow you to upgrade to a larger refrigerator in the future. Most refrigerators are between 32 and 36 inches wide. Fill up the gaps with filler strips or panels to make the room feel more spacious. You may either put shelves between the panels over the top of the fridge or top cabinets over the top of the fridge. Order the filler strips and panels at the same time as your cabinets to ensure that they match.

Keep an eye out for any floor gaps

The gap between the old floor and the new cabinets may need to be filled if you’re preserving your existing flooring but changing your cabinetry. Base cabinets are typically 24 inches deep, however the depth of toe-kick cabinets varies. Cabinet widths are available in three-inch increments from 6 inches to 48 inches. A gap will be left in your cabinetry if the new cabinets do not fit inside the current cabinetry footprint. Make certain that the entire width of the new cabinets corresponds to the total width of the cabinets you’re replacing. Molding can be used to conceal gaps that are less than 3/4 inch wide.

Countertops should be ordered once the cabinets have been installed

Measure the base cabinets that are already installed to estimate the countertop measurements; do not rely on the ones on your drawings. Due to out-of-square walls, it is possible that the row of cabinets will have a different size after installation. A carpenter’s square should be placed in the corner over the end cabinet. Because of the layers of joint compound applied to the wall, the corner may appear narrower than the rest of the wall. In order to minimise an unsightly gap between the countertop and the wall after the countertops have been put, measure up to the furthest point on the wall above the cabinets.

By Admin

Leave a Reply

Your email address will not be published.

error: Content is protected !!