Purchasing a new home for a growing family is exciting. However, there are some things that you should do to make sure that your experience is as pleasant as possible. One of these things is checking out the quality of your home before moving in. Then getting a thorough inspection done by a professional. Before buying that ideal home you’ve been eyeing, keep in mind these 5 qualities of a good house:

1. The heating, cooling, and plumbing systems are running in operating well.

If your dream house has functional heating, cooling, and plumbing systems, then it’s a good place to start weighing in your options. Problems in these systems could lead to disastrous damage to your home. Suppose the cooling and heating systems have not been maintained for a long while. In that case, it collects dust and allergens, and by the time it gets used again. The collected dust and allergens will most likely spread throughout the house, making it a serious health hazard. As far as broken plumbing goes, you will notice water leaks in the walls, which is very conducive to mold growth. Take it with your house inspector and ensure these systems won’t cause any trouble in the long run.

2. Roof, walls, foundation, and windows are intact.

You should look for holes or damage on your home’s structure and foundation. If there are any signs of water damage or mold/mildew inside your home then it’s time to move on! Termites, carpenter ants, and other pests can also cause problems if they exist in high numbers. It’s important that you check all areas around the house (including under the doors) before moving in. If the damages cost more than they should, then it’s probably a good decision to look for another house option. If you think your potential house doesn’t have these negative qualities and are still not sure about it, you can always get a quality residential inspection in Philadelphia, PA, and obtain an estimated quote for the necessary repairs.

3. Look for electrical fire or shock hazards

You should also check for electrical fire or shock hazards. This is especially important if you have young children or pets at home. Consider checking for the following:

• Frayed or cracked wiring. If you see frayed wiring, it could be a danger to anyone who comes into contact with it. It could also cause an electrical fire if left unattended for too long and/or easily damaged by water damage (i.e., rain). The best way to avoid this problem is by inspecting all of the wires before moving into your new house—even those that aren’t visible from outside! If there’s even one small strand that looks like it might break off anytime soon, you shouldn’t take chances! 
• Loose or broken switches. Switches can fail without warning; they’re often overlooked when checking out potential houses but shouldn’t be neglected either because these malfunctions could mean serious injury if left unchecked until after moving day arrives. 
• Defective light fixtures. Problems in light fixtures can be attributed to poor installation as they may not fit properly within existing walls due lack of space between the outlets. Ending up with flickering lights or a burning smell might not be a pleasant experience for your visitors, so better have them checked and see to it that the needed repairs will not overwhelm your budget.

4. The property’s grounds and surroundings are well-maintained.

You can also check the neighborhood and see if there are any signs of neglect. Do you notice that the house looks like it’s been left empty for a long time? Is there evidence of animals or other pests, such as birds nesting in gutters or around the windows? Are there any dead trees nearby? As a renter, you don’t have much control over these things. However, if you’re purchasing a property from an owner who isn’t selling because they’re leaving the state or moving into an apartment complex (or worse), it could be wise to consider these factors before putting in an offer on your new home.

5. Low radon levels

Radon testing is a simple, inexpensive way to ensure that the house you are moving into is safe. Radon is a naturally occurring gas that has been linked to lung cancer and other health problems. It can be found in most homes, although it tends to accumulate in basements and crawl spaces due to the lack of humidity there. To test for radon levels in your home, you can purchase a radon detection kit from a hardware store or online retailer (they’re usually less than $20). Follow directions on how long you should leave out for testing before taking samples inside each room with different types of surfaces (flooring, walls/ceilings etc.) and then compare the results with readings on the paper provided by the manufacturer’s instructions (usually within 5 minutes). For a thorough radon testing, consider calling up a house inspector near your area and get professional service.

It pays to be meticulous 

It’s important to remember that a home inspection is not an easy task. You should expect the inspector to take their time, inspect everything thoroughly, and ask you for feedback about your home. A thorough house inspection will be the best way to ensure your family is safe in the home they are moving into. Once you’ve decided to buy a home, it’s time to make sure that your new home is as safe and healthy as possible. Call a professional home inspector right away for a thorough inspection.